For Fluorescent Lamps, Gas Discharge Lamps & Air-Conditioner
Saves up to 28%
Stop paying for energy wastage
Higher performance over electronic ballast
Lower operation cost
Why Lighting Energy Saver?
Fluorescent lamps, particularly the 18W/36W fluorescent tubes and High Intensity High Pressure Gas Discharge Lamps (mercury or sodium vapor lamp etc) are common lightings used today. It is worthwhile to note that these lightings generate a considerable amount of inevitable energy wastage ranging from 30% to 50%. Thus a significant part of the electricity bill goes to pay for this wastage. The
Energy Saver is the cost effective solution to turn this wastage into savings whereby companies can save hundreds of thousands of dollars each year.
The
Energy Saver reduces energy wastage up to 38% and at the same time, it increases the lamp’s lifespan. Its long product lifespan, low cost, energy savings, short payback time and low installation cost are an excellent choice over any other conventional saving methods.
All
Energy Savers are designed as an add-on retrofit device without the need for re-writing to the existing light fitting. This helps tremendously to save extensive labour cost for re-installation such as electronic ballast. A simple 1 minute retrofit installation can be achieved with minimum training.
Features & Benefits
- Achieve
energy saving up to 38%. Excellent alternative over
electronic ballast.
- Increase fluorescent tube lifespan up to 60%. This helps to reduce maintenance costs both over replacement and labour.
- Improve Power Factor hence reduce KVA maximum demand tariff.
- Reduce fluorescent tube heat loss up to 27% which in turns enable air conditioner saving.
- Quick payback time within a year, typically 3 to 13 months depending on operational hours and light fitting configuration.
- Product lifespan of 100,000 operations
- Simple and quick
Do-It-Yourself installation
Benefits Over Electronic Ballast Energy Savers vs Electronic Ballast
Energy Savers Savings : 20% - 28%
Electronic Ballast Savings : 10% - 20%
Any Heat Reduction on Energy Savers : Yes, reduced
Any Heat Reduction on Electronic Ballast : No, heat up lamp & ballast
Energy Savers Life Span : Very long
Electronic Ballast Life Span : Short
Energy Savers Cost : Low
Electronic Ballast : High
Energy Savers Payback Time : Within a year
Electronic Ballast Payback Time : 3 to 5 years
Energy Savers On/Off Switching : More durable
Electronic Ballast On/Off Switching : Vulnerable
Energy Savers Tube Life *1 Increase up to 60%
Electronic Ballast Tube Life *1 Increase up to 60%
Energy Savers Tube Life *2 : No change
Electronic Ballast Tube Life *2 : Reduced by 25%
Energy Savers Size : About 10 times smaller
Electronic Ballast Size : Bulky
Energy Savers Retrofit : Fast & Easy (approx. 1 min.)
Electronic Ballast Retrofit : Too costly on labour
Energy Savers Emergency Lighting : Possible
Electronic Ballast Emergency Lighting : Most models not possible
Energy Savers Device short circuit : Will not damage or trip
Electronic Ballast Device short circuit : Trip and likely damaged
Energy Savers Operating Frequency : 50Hz
Electronic Ballast Operating Frequency : 20KHz to 48KHz
Energy Savers Harmful Harmonics : No
Electronic Ballast Harmful Harmonics : Yes
Energy Savers Improve Power Factor : Yes
Electronic Ballast Improve Power Factor : Yes
Energy Savers System Current/Tube : 0.14/0.15A
Electronic Ballast System Current/Tube : 0.16/0.17A
Energy Savers Weight : 30g
Electronic Ballast Weight : 300g
Note *1:
By reducing load on the lamp electrodes
Note *2
Instant start switching reduce lamp life by 25%.
World's Revolutionary Energy Savers
For more information, pls click AIPL
